Home / Towel Ring / Towel Rack Over Radiator

Towel Rack Over Radiator

Nichole Quinn Towel Ring November 22nd, 2018 - 23:12:29

The radiator, in this end, cause really two tails, and often you get these on edges and you actually need a radiator key, which is a large Allen, the key to insert them, but this particular one has got flats on it. So we can quite easily put balls into shooting a spanner if you look on this end, there's no actual sealing ring to anything. So it's going to rely on PTFE tape to seal it.

So we're going to wrap some PTFE tape around the threads and we've gone around about 12 times now, so that should do so once you've done that you can then screw that directly into the radiator, then we'll just tighten that up using a spy. So I've decided to put the river to you in this position and I've lifted it off the floor by maybe eight to ten inches. With some volunteer soar to the right hand, side lies the center so I'll try to align that with the brow line there in the center a lot like barrels again, but I will be doing so.

If we then look down, you can see, they've got it on an all top of Taylor DS, if so I'll, just keep it there for the moment and they're just going to take a closer look at the actual fixings that came with this, so that actual piece fits around the radiator and then that bit fits in and they're both fit into this part, and this part is screwed to the wall.

49 out of 100 based on 834 user ratings