Leanne Hughes Towel Ring November 11th, 2018 - 23:39:39
Towel bar into drywall using anchors preparation gather the right Tools for the job for safety and ease recommends using a drill, a 5/16 inch drill bit Phillips, screwdriver level, hammer tape, measure tape, pencil and safety glasses. Remove the mounting brackets from the decorative posts each mounting bracket is secured to a decorative post, with a set screw simply loosen the set screws with the Allen wrench provided in your hardware kit to remove the brackets, determine placement and desired length.
The towel bar expands from 18 to 30 inches to fill any wall space, decide where to install the towel bar and what length best fits your available wall space place. The mounting template at the proper location and tape. One side to the wall use a level to ensure the template is even and tape. The other side then fold the mounting template to match the desired length, make sure the horizontal lines on the template line up after folding mount the brackets to the wall. Drill two 5/16 inch holes for each mounting bracket.
Remove the mounting template from the wall fold the ends of each anchor together and insert them into the holes lightly. Tap the anchors with a hammer until flush with the wall, then insert the red plastic pin into each anchor to activate position each mounting bracket over the holes with the up symbol facing up and thread the screws until tight, be careful not to over. Tighten the is attaching the decorative posts to the mounting brackets place.
Copyright © 2019 playdhd.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Lamp shades wood lamps wooden floor lamps wall clock double bathroom vanity led string lights soap dispenser best toilet seat rocking chair round tablecloth ikea bathroom sinks plastic tablecloth outdoor light best accent chair.