Ruth Woods Towel Ring September 22nd, 2018 - 02:56:13
So we can get this hand towel installed in the bathroom, pretty important thing it's easy to do. Let me show you how all right so the first thing we're going to do is figure out where to position this, so your position in extra door put it over by the mirror. Obviously, you pick where it's going to look good in your particular situation. In this case, this is going to kids bathroom, so I'm going to keep it fairly low and right by the edge of the counter. Hopefully the towel stays on the towel ring.
So a couple things this comes with a bracket bracket is going to go inside like so there's this screw here, little tiny screw. We want to make sure that's pointing down, so the top is looking nice for people and then we're going to figure out just how high to matter right about there. The next thing I need to figure out is whether I'm going to be mounting into a stud in the wall or not. A stud is, depending I may need to use some plugs to go into the drywall to help this knot pull out or if I'm just going to do a stud. I can just use the screw by itself couple ways to do that.
One way to find studs is to knock on the wall and listen for a change in sound so right about. There you'll hear a slight change in the pitch now, if you're not confident that you can always get a stud finder, these are pretty easy push. The button on the side and now we're going to move this along the wall and it beeped where the stud was right there, there's more over here. So with that, I know the place. I'M a meanness does not have a stud, so I'm going to have to put in these dry wall plugs all right.
So I'm marking the place where I'm going to hang this towel ring you go right. There.
I got my bracket with my bracket, I'm going to mark with the screw, so I know where to sew those marks with the screw I'll know where to drill in and install this with, my two spots marked for the screws I'm going to get ready to drill These in, though, there's a couple ways to do that. One way you can take a drill bit make sure it's the right size compared to your ear, plug and drill in I'm going to do it away that I found a little bit easier. It's not probably not as clean and such puts a little bit quicker.