Olive Lynn Towel Bar September 10th, 2018 - 02:23:45
Towel bar into drywall using anchors preparation gather the right Tools for the job for safety and ease Moen recommends using a drill, a 5/16 inch drill bit Phillips, screwdriver level, hammer tape, measure tape, pencil and safety glasses. Remove the mounting brackets from the decorative posts each mounting bracket is secured to a decorative post, with a set screw simply loosen the set screws with the Allen wrench provided in your hardware kit to remove the bracket, determine placement and desired length.
The Moen towel bar expands from 18 to 30 inches to fill any wall space, decide where to install the towel bar and what length best fits your available wall space place. The mounting template at the proper location and tape. One side to the wall uses a level to ensure the template is even and tape. The other side then folds the mounting template to match the desired length, make sure the horizontal lines on the template line up after folding mount the brackets to the wall. Drill two 5/16 inch holes for each mounting bracket.
Remove the mounting template from the wall fold the ends of each anchor together and insert them into the holes lightly. Tap the anchors with a hammer until flush with the wall, then insert the red plastic pin into each anchor to activate position each mounting bracket over the holes with the up symbol facing up and thread the screws until tight, be careful not to over. Tighten the is attaching the decorative posts to the mounting brackets place.
Copyright © 2019 playdhd.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Floor lamps table lamps wooden floor lamps 8 inch wall clock bathroom vanity string lights plastic soap dispenser toilet seat warmer best rocking chair square tablecloth ikea bathroom sinks linen tablecloth outdoor decor best accent chair.