Home / Towel Ring / Brushed Nickel Hand Towel Bar

Brushed Nickel Hand Towel Bar

Karyn Rice Towel Ring November 21st, 2018 - 17:50:16

The towel bar expands from 18 to 30 inches to fill any wall space, decide where to install the towel bar and what length best fits your available wall space place. The mounting template at the proper location and tape. One side to the wall uses a level to ensure the template is even and tape.

The other side then folds the mounting template to match the desired length, make sure the horizontal lines on the template line up after folding step 4 mount the brackets to the wall. Drill two 5/16 inch holes for each mounting bracket. Remove the mounting template from the wall fold the ends of each anchor together and insert them into the holes lightly.

Tap the anchors with a hammer until flush with the wall, then insert the red plastic pin into each anchor to activate position each mounting bracket over the holes with the up symbol facing up and thread the screws until tight, be careful not to over. Tighten the last step is attaching the decorative posts to the mounting brackets place. The post on the mounting brackets with the set screws facing down using the provided Allen. Wrench tighten the set screws to secure the decorative posts in place.